DSL - Static - Windows 2000

This page describes how to setup Windows 2000 for DSL via Static IP Note: This setup is not recomended for a computer being used as a file server

Prerequisite: You will need to have a properly installed and working Network Interface Card (NIC). Open the Network Control Panel

• Click on the "Start" button.
• Click on "Settings".
• Click on "Network and Dial-Up Connection".
• Click once on the "Local Area Connection" icon to highlight it.
• Click on the "File" menu and select "Properties".

• Verify that your Network Interface Card is listed under "Connect using".
• Double click on "Internet Protocol (TCP/IP)".

Configure TCP/IP

• Click on "Use the following IP address:", then then fill out the "IP address", "Subnet mask", and "Default gateway" fields with the information provided to you by LavaNet.

Note: If you do not have this information or need assistance, please call LavaNet Tech Support.

• Click on "Use the following DNS server addresses:".
• In the "Preferred DNS server" field, type in "64.65.64.1".
• In the "Alternate DNS server" field, type in "64.65.64.65".
• Click "OK" out of all of these screens
• You should now be configured to use your LavaNet DSL.